DSP-Filter Analyser and Multimode Decoder Programm
for 2 Radios simiultaneously and TX options!
!NEW!  for Windows 2000, XP and Vista  !NEW!

TimeSignal-, RTTY-, CW- , PSK32-, FAX-, SSTV-MultiDecoder
plus SubDecoder and Sende-Encoder
3D Scanner, Equalizer, SatTraking, AudioAnalyser and Osziloscopes
with Time-Management and 9 integrated Frequency-Databanks
DualRadioControl for more then 100 Radios without extra Hardware !
Spectrum-Analyser, Equalizer-Filter, Freq.Scanner and Radio-Control
with Frequenz-Managment incl. inergrated ScheduleManger
incl. InterNet Satellite Image DownLoad-Service
 
download RadioCom 6.0 DEMO   here!
 

RadioCom 6.0 is a new leap forward after the successful predecessor RadioCom5. RadioCom6 transmits and receives data (SSTV, PSK31, RTTY, Weather fax, Synop, Navtex, CW and more) and from the Internet www.meteoserver.net (world wide satellite pictures) in one program. Two Radios can be connected simultaneously at 1 sound card only. You can run and operate several decoders at the same time. The Digital Sound-Processor (DSP) of the sound card is used. That is why the quality is better than anything compatible. The moment RadioCom starts, some of the foremost changes are in plain view: it is distinctive and eye-catching. Colors are subtler and the overall looks are just magnificent, never seen before.
 

WHAT DOES THIS PROGRAM DO?
It decodes digital and analog radio signals. It also improves the quality of audio, which in the past, was only possible with an expensive DSP-receiver. The signal goes directly into your computer via the soundcard for processing. You can also control up to 2 Radios via the COM-port and all of this without any extra hardware. The received signals are filtered and given out to the computer loudspeakers. RadioC¬om6 will come with: Filter-Analyzer, TimeSpectroscopes, DualScope, Audio-Recorder, RTTY, CW, FAX, SSTV, PSK (PSK31, Q- and B-PSK), Synop-Decoder, 3D Scanner, ScheduleList and SatTracking. This means you have all you need in one program.

Up to now the requirements for SSB-receiver & decoders to process radio messages was extremely high and expensive. With today's normal multimedia-PC a complete new concept could be developed so that the expensive extra filters are replaced, and the operating comfort is improved. Expensive screens, scopes and tools are now generated on your computer screen.

It's hard work to understand and program for Digital-Sound-Processing, Frequency-Analyzing and Decoding. What in the past was very expensive is now possible on your computer. Completely hissed signals from low cost receivers are so improved by the effect of the integrated equalizer; it improves the audio and the difference can be seen on your display.

With RadioCom 6.0 we have created a desktop specially fit to your necessity. The Live-WorkViewer for example facilitates to receive a weather fax, while you are modifying another one, without interrupting the incoming fax. All desktop elements can be modified to your own liking, i.e. color. The Dual-Scope improves the analysis from cause and effect of the signal quality. SpectrumAnalyzer, TimeSpectroScope and X/Y-Scope are helpful tools for that.

With the modifiable database with 8! User Banks of the Frequency-Manager it is possible to save all the complex data of radio stations, and to recall them on demand. The database also holds decoder-data for the SynopDecoder and Keplerian data (for sat-receiving). Now you can plan with the Time-Manager different tasks, so nothing will be missed.

The Frq-/Channel-Scanner-Function show you signal strength, Audio-events and 3D Diagrams. The event-saving makes later analyzing of events with frequency and time possible. And with the Audio-Recorder you can record and replay signals for later analyzing or decoding.

SatFax can receive live and synchronous without the normal Doppler effects and display in the highest resolution.

The included SatTrack-Program allows you to see when and where you can find the satellites on the integrated world map. The AudioController controls all audio functions, drivers and mixers, also the special AudioSquelch and the DSP-filter with the FFT-Equalizer (Fast-Fourier-Transformation). This allows to set several Notch filters in one band filter or to create a filter curve with desired form and variable slope with a 2 Hz resolution. You can simply draw a curve character with the mouse.

Technical Data:
AudioController
Controls all Audio functions, drivers and mixers.
Audio-Squelch, Filter- and Equalizer- Functions controls, etc.
RTTY-Decoder
RTTY, SITOR, B-PSK, Q-PSK, (PSK31), incl. NAVTEX and SYNOP-Decoding. All parameters totally variable.
FAX-Decoder
AM / FM Fax, all IOC's and RPM's; Fax-Special-Filter, HAM-Fax, Weather-Fax and SAT-Fax direct.
SSTV-Decoder
All Modi. Special filters, Color up to 32 Bit, all picture formats and parameter totally variable.
CW-Decoder
All parameter totally variable.
Audio-Recorder
Record and replay from signals, incl. Func¬tions for later analyzing and decoding.
Filter / Equalizer
Filter-/ equalizer functions up to 2 Hz resolution with variable slope. All filter combinations possible..
Channel-Scanner, Frequency-Scanner
3D-displays from signal strength, audio-events or time diagrams. event-saving for later analyzing.
Time-Manager
Organize reception from text and picture from the desired time
Sattracking
Displays all Satellites on a word map, inclusive all Keplerian datas and decoder types, also with a time schedule.

System requirements
SSB-Receiver or Transceiver
(remote controlled if possible)
RadioCom6 can be combined with almost all makes of receiver. For example, those produced by Sony, Panasonic, Grundig, and Siemens, and any others with SSB reception. However, these cannot use timer-operated remote/radio control. We recommend controllable Radios, such as those made by Yaesu, Icom, Kenwood, JRC, AOR, and Skanti. In the delivered switchbox is already the control-electronic inside to remote control for more than 100 receivers and transceivers.


You don’t need a level converter!
It already comes with the software package for most radios. This reduces the cost to a minimum to upgrade to the digital age.


Computer:
The computer must have an Intel Pentium/Celeron processor with at least 1 GHz, 256 MB RAM, a bi-directional sound card with a LINE-IN port, a spare COM port, and either Windows 2000/XP/Vista or higher installed, as well as a graphics card with 1280x1024 16 bit colour resolution.


Prices:

RadioCom 6 full lversion

232,-€

RadioCom 6 Upgrade 5 to 6

   69,-€

RadioCom 6 Upgrade 4.0 to 6.0

89,-€

RadioCom 6 Upgrade 4.5 to 6.0

139,-€

Steuerkabel for div. Radios

19,-€

TX Kabelset for div. Radios

39,-€

 

(c) 2007 BONITO Germany

Web: www.bonito.net      email: info@bonito.net