Features:
- Full package includes the software MeteoCom 6
and the HF-receiver MeteoJet 1204S and all necessary connecting
cables.
- Easy to install and to use
- Decodes: WeatherFax, RTTY, Synopsis, Navtex
and Morse Code in high resolution
- Includes a world wide data base and world map
showing the locations of all current stations including all
frequencies and transmission times for each station
- Fully automatic timer operation
- Two HF-radios can be connected simultaneously
- All received weather information can be
viewed on a monitor and printed to a standard printer attached to
the PC.
This package contains the
MeteoCom 6 software, and
the new Bonito SSB-Receiver MeteoJet 1204S and all necessary connecting
cables. This software/ hardware combination is characterized by smooth
start-up and good results as well as an outstanding cost/ performance
ratio.
The MeteoJet 1204S is a black box receiver which is intended to operate
in conjunction with a computer. In connection with MeteoCom 6 this
package represents the value of an expensive DSP-receiver. Through the
use of the modern technique called SDR, completely new software decoder
were developed. WeatherFax, Navtex and RTTY can be decoded in much
better quality than by conventional SSB radios. This is achieved through
direct IF decoding. Even noisy weather faxes can still be read very
clearly. Using this new technology greatly simplifies the user interface.
No slant correction is needed any more, for example.
Expensive filters, displays and switches are not important factors when
considering onboard use. A much higher emphasis is placed on small size,
freedom of installation and low power consumption. Deciding factors for
onboard use are functionality and cost.
We were able to use the full potential of this receiver and integrated
it into the software development. The control, for example, was
completely integrated into MeteoCom 6 and is done via a USB-interface.
Also integrated is the time management which allows for full automatic
operation. The MeteoJet 1204S unit can be installed at a concealed
location. There is only one USB cable that connects the receiver with
the computer. The unit is USB-powered. It covers 40 kHz to 30 MHz,
tuning step accuracy is 1 Hz.
With this package you get a weather information system which
is able to receive weather information in the background, fully
automatic.
Images: |
Technical Data:
- Tuning range: 0,040–32 MHz
- Modes: AM, USB, LSB, CW, DRM Stereo
- Operating temperature range: –10 °C to +60 °C
- 24 Bit ADC with a sensitivity of .03 µVolts
on a noise level of -137 dBm
- Frequency Stability: better than ±3 ppm
- Power supply: USB-Powered
- Power consumption max. 0,22 A
- Antenna connection: 50 Ohms (BNC)
- Dimensions (W×H×D; without protruding parts):
112 mm × 32 mm × 112 mm
|
