High Pass Filter HP0020 Hochpassfilter

HP0020 High Pasa Alto

El filtro pasa alto con forma eliptica HP0020 suprime todas las frecuencias por debajo de 2 mhz. Emisores potentes o cercanos de onda larga o media pueden causar interferencias e intermodulaciones en onda corta. Esas interferencias pueden ser anuladas de forma efectiva por este filtro. El filtro HP0020 es muy empinado por lo cual las frecuencias de la parte alta de la onda media son suprimidas de forma eficiente. Para una mayor efectividad, el filtro pasa bajo debe ser colocado juston en la entrada del receptor.

Valores de atenuación (tip.):

<0.50 MHz:-55dB
1.0MHz: -45dB
1.6 MHz:-35dB
2.0MHz: -3dB
>2.5 MHz: -1dB

DC bloqueada en entrada y salida(max. 50V DC)

Dimensiones: 88mmx31mmx25mm (3,46 x 1,22 x 0,98 inch)

Atención: Solo válido para recepción. Si emites se dañará!
Como el filtro tiene DC bloqueada, tiene que ser puesto entre la entrada al receptor y la entrada de alimentación.

Probado con éxito en: Elad FDM-S1 y FDM-S2, FiFi-SDR1.0 y 2.0, PM-SDR, Winradio Excalibur, RFSpace SDR-IQ

High Pass Filter HP0020 Hochpassfilter

HP0020 High Pass Filter

The elliptically-formed high pass filter HP0020 suppresses all frequencies below 2 MHz.  Strong or near-by transmitters in the long- or medium wave range can cause interferences and intermodulation in the shortwave range, which can effectively be suppressed with this filter.  The HP0020 filter is very steep, so that signals in the upper medium wave range are already suppressed effectively. For the greatest possible effectiveness, the low pass filter  should be inserted directly before the receiver input.

Hochpassfilter HP0020 0-5MHz

Attenuation values (typ.):

<0.50 MHz:-55dB
1.0MHz: -45dB
1.6 MHz:-35dB
2.0MHz: -3dB
>2.5 MHz: -1dB

Input and output are DC-blocked (max. 50V DC)

Dimensons: 88mmx31mmx25mm (3,46 x 1,22 x 0,98 inch)

Successfully tested with: Elad FDM-S1 and FDM-S2, FiFi-SDR1.0 and 2.0, PM-SDR, Winradio Excalibur, RFSpace SDR-IQ

order now

Attention: Only suitable for reception, high HF (>10dbm) will cause permanent damage!
Because the filter is DC-blocked, it has to be inserted between the receiver input and the power inserter.

Schon gesehen?

Miskito End Fed Multiband Antenne 50Watt

Moskito End Fed

Mosquito End Fed – small and light After the Mini-End Fed was so well accepted, …