|
|
|
|
May 2019 |
|
|
|
|
Dear Bonito customer, dear prospective customer
You have not read from us for a long time. Due to the partly uncertain legal situation we have not sent a newsletter
anymore. Since the situation is finally clarified and the demand for a newsletter remains high, we will send newsletters again. However, within reasonable limits. Via this way we would like to inform you about new products, exhibitions and events and provide you with tips and tricks.
|
|
Updated online shop
As already announced, we have successfully updated our online shop at www.hamradioshop.net
The shop is now much safer and also better to use. All your data is still stored and can be used as usual.
Bonito Newsroom
I would like to recommend you our
Bonito Newsroom. There you will find in addition to news, tests, articles on specific topics such as
coaxial cables, our visit to Grimeton or from devices such as
SDRPlay RSPduo or KiwiSDR as well as
tips and tricks.
Facebook and Instagram
We also constantly provide news, information, pictures and reports to the very popular platforms like
Facebook. At
Instagram we also post photos and videos directly from fairs and events where we exhibit.
|
|
|
|
|
Coaxial
Common Mode Noise
Filter CCMC30
NTi’s Coaxial Common Mode Noise Filter (CCMC30) has been especially optimized for maximum common mode noise rejection of
>30dB wide band in the frequency range of 150kHz – 30MHz. With slight limitations a much wider frequency range is covered. In the medium wave range for example a noise suppression of up to 45 dB can be achieved.
|
|
Preampliefier
Mast preamplifier for the 6m, 2m or 70cm meter band with integrated VOX circuit, bias T and coaxial relay, which can work up to 100 watts without external accessories, with a noise figure of only 0.35db. The applied signal is amplified by + 24dB. Further models are already under development and will be presented here gradually.
|
|
|
|
|
|
GI1000 - 50kHz
to
1,25GHz
The Galvanic Antenna Isolator GI1000 suppresses noise reaching the ground connections on the receiver. The GI1000 covers a wide-band range of 50 kHz – 1 GHz (typ. 1,5dB insertion loss). This unit can be used in many receiving applications, It will also work with frequencies up to 1,25 GHz.
The unit also has integrated double over-voltage protection and input and output are blocked for DC voltage.
|
|
EndFeed DIY kit
Our popular End Feed kits come complete with 100 and 300Watt each. Two versions are available: 10-15-20-40-80 meters with a length of 21 meters and 10-20-40 meters with a length of 12 meters. Further, there is now also an all-in-one version
available for the bands 10, 12, 15, 17, 20, 30, 40 80 and 160m, which can even be operated with up to 450 watts.
|
|
|
|
|
|
Coax cabels
Now is the right time to look through your coaxial cables and connectors and to renew if necessary. Over the long winter months, water and moisture could damage the cables and cannectors. Moisture sits between connector and antenna socket. We have different cable types from 5mm to 10mm from Messi
& Paoloni, as well as matching connectors and accessories in stock. We also like to assemble the cables with the desired connectors for you.
|
|
MegaDipol MD300DX
The MegaDipol 300DX is a broadband active dipole with a maximum upper working frequency of 300MHz. The dipole reacts to the electrical component (E-Field) of the electromagnetic field and will deliver best results regarding signal strength and SNR (signal -to-noise-ratio) at locations with little or no locally generated interference.
|
|
|
|
|
|
Hamradio 2019
Once again we will exhibit at the Hamradio 2019 in Friedrichshafen. However. wath a new booth number. You will find us now at
Hall A1 Booth 530. Of course we will have some new and proven products with us. We are happy to meet you there.
|
|
|
|
|
|
|
|
|
|
|
|
|